MacBook getting hot but the fans are not spinning up? What is normal and how to control them
A MacBook that heats up while the fans stay quiet is not always faulty. What Apple documents as normal, which MacBook Airs have no fan at all, which checks are worth doing, and how to set the fans manually.
On this page
Facts verified
An app can raise the fans on a MacBook Pro with Apple silicon, within what the firmware allows. Apple silicon MacBook Air models have no fan, so nothing can spin one up.
First, check your model in About This Mac. If yours has a fan, clear the vents, restart, and check Activity Monitor for a busy app. If it still runs hot, run Apple Diagnostics and contact Apple; the steps are further down.
On an Apple silicon Mac with fans, download CoolCurve, set a manual speed, and compare it with the fan speed it reports. The firmware can refuse the request. Manual control needs a license after the trial.
I build CoolCurve, a fan app, so I sell one of the answers below. Every Apple claim here comes from Apple's own pages, linked at the claim, and every claim about another app comes from that maker's own page, checked on the verification date shown on this page. If I got something wrong, email support@taperlark.com and I will fix it and say what changed.
Does your MacBook have a fan to spin up?
Apple's current MacBook Air page lists "a silent, fanless design" for the M5 models, and its newsroom releases have said the same of every Apple silicon Air since the M1 in November 2020.
So if you own one of those Airs and it gets hot, it has no fan that is failing to spin up, and the lever left to you is giving it less to do. If you are not sure what you own, CoolCurve lists the fans it finds and shows a plain "No fans detected" on a Mac that has none.
For MacBook Pro and other Macs with fans, Apple's own wording is conditional: "If your Mac laptop has fans, they turn on automatically to cool critical components". That sentence is the key to the next section.
Is it normal for a hot MacBook to keep its fans off?
Sometimes, yes. Apple says on the same page that "your Mac laptop computer can get warm during normal use," and its fan noise article explains that sensors inside the Mac switch the fans on when they detect temperature changes. It adds that heavy work such as video compression or a graphics heavy game makes the fans run faster, and that a high ambient temperature makes them "turn on sooner and run faster."
What Apple does not publish, in the pages I found, is the temperature at which a fan starts on an Apple silicon Mac. So I cannot tell you that a given warm feeling should or should not have woken the fans. Treat the next point as reasoning, not as a documented rule: a laptop that is warm to the touch while it does light work can be inside what its firmware considers comfortable, and the fans then have no reason to run.
Two vendors document something stronger. CrystalIDEA's FAQ for Macs Fan Control answers a question about a fan reading of zero by saying it is fine on a MacBook Pro from 2015 onward, because "these models turn off the fan(s) when the CPU temperature is low enough." Tunabelly's FAQ for TG Pro says that on some models "the fan(s) can be turned off by the hardware if the temperatures are low enough," that this is "our theory" about Apple lowering power consumption, and that TG Pro cannot control a fan in that state. For M3 the same FAQ says that if the hardware disables fan control, TG Pro "(or any other third-party app) cannot override these restrictions," and for M4 that when the hardware powers off the fans, TG Pro "is unable to override this behavior." CrystalIDEA's release notes for Macs Fan Control tell the same story from its side: a limited fan control warning on M3 and M4 Pro and Max MacBooks in version 1.5.17 in December 2024, and complete fan control brought back on M3 and M4 MacBook Pro in 1.5.18 in June 2025.
Some of what you are asking for, then, is a request the firmware may decline. A fan app can ask. It cannot force.
When to get the Mac checked instead
Hot, slow and silent all at once is the combination worth chasing. These are the checks Apple itself documents, in the order I would try them:
- Look at where and how you use it. Apple says to keep the vents clear, to use a hard, flat surface, and notes that on a couch, bed or lap "its fans might run more." Apple also gives an ambient temperature range for Mac laptops on its operating temperature page, so check that you are inside it.
- Restart. For a Mac with Apple silicon, Apple's fan article says to close and open the lid or restart, and the operating temperature page gives the same step before it tells you to contact Apple.
- Open Activity Monitor and sort by CPU. If the Mac is hot and sluggish, Apple says in its kernel_task article that kernel_task manages CPU temperature by making the processor less available, which makes it the response to heat rather than its cause. The loud fan checklist walks through finding what is generating the load, and it applies when the heat is real even if the fans are quiet.
- Run Apple Diagnostics. Apple's diagnostics page says it helps you work out which hardware component might be at fault. On a Mac with Apple silicon you hold the power button until the startup options appear, then hold Command-D. If it shows a reference code, Apple's reference codes list says PPF001, PPF003 and PPF004 mean "There may be an issue with the fan."
- If it still looks wrong, contact Apple. The operating temperature page says "if you have issues with your Mac laptop's operating temperature, contact Apple."
I have left out any claim about what a healthy fan speed looks like, because I have no source for one.
How do I control my MacBook fans manually?
On a Mac that has fans, a fan app can ask the firmware for a speed that is higher than the automatic one. Whether the fans comply is the firmware's call, as above. If you are weighing whether that is safe, the safety explainer covers it, and its argument is that running a fan faster adds airflow and noise while the Mac's own temperature management keeps running underneath.
Here is what CoolCurve does, from how it is built. It is for Apple silicon Macs only, and the product page lists the macOS requirement.
- A fixed speed: a slider per fan in the menu bar, plus a full blast button that asks for the top of the fan's range.
- A curve: temperature and fan speed points that you place, with straight segments between them, driven by one sensor you pick or by the hottest sensor. A curve that starts early is one way to ask for fans sooner. The built-in Max preset, for example, asks for a higher speed at low temperatures than the Balanced preset does.
- Rules: a threshold on a sensor with a release point, a dwell time and a target speed, for one fan or all of them. They act on fans already under curve or manual control.
- Presets, and a switch that picks one on battery and another on AC power. If your complaint is a fan that is loud while charging, that has its own guide.
- A restore button. Returning to Apple's automatic control is available for one fan or every fan at any time, even after the trial.
Watch the reported fan speed as well as the speed you asked for. If the firmware refuses a request, the reading will not follow your target.
CoolCurve's temperature and fan monitoring stays free after the trial, with no license. Manual fan control, curves, rules, presets and automatic preset switching run in full during the trial and need a license afterward, so you can download it and see whether your fans respond before you pay. The curve explanation is in the CoolCurve guide, and the plans are on the product page.
Free and paid alternatives
Macs Fan Control is free to download for macOS and its page says it works on all Macs, Intel and Apple silicon. Its fans are either on Auto or on Custom, which can be a constant speed or a speed that follows a temperature sensor, and it puts the fans back to Auto when you quit. What it charges for is explained in the free vs Pro breakdown.
TG Pro offers a 14 day free trial and a one time payment of $10. It has Auto Boost rules that raise fan speed at a temperature you choose, plus manual and Max options that its page says "depend on your Mac model and settings." It also says fan controls are available on models with fans, and that fanless Macs can still monitor temperatures.
Stats is free and open source, and it monitors temperatures. Its README lists fan control separately, in legacy mode, and says it receives no updates or fixes, so use it to watch the numbers, not to rely on for control on a recent Mac.
A side by side of the two best known paid and free options is in Macs Fan Control vs TG Pro, and the wider list is in the alternatives guide.
Apple, MacBook Air, MacBook Pro and macOS are trademarks of Apple Inc. Macs Fan Control and CrystalIDEA, TG Pro and Tunabelly Software, and Stats and Serhiy Mytrovtsiy are the names and marks of their respective makers, used here only to describe published claims.
Frequently asked questions
Why don't my MacBook Pro fans turn on when it gets hot?
Apple says that if your Mac laptop has fans, they turn on automatically to cool critical components, and that a Mac laptop can get warm during normal use. Apple does not publish the temperature at which an Apple silicon fan starts, so a warm Mac with quiet fans is not proof of a fault. Heavy work makes fans run faster and a warm room makes them start sooner, according to Apple. CrystalIDEA also says a MacBook Pro from 2015 onward turns its fans off when the CPU temperature is low enough, and TG Pro's vendor says no third party app can override the hardware when it has powered them off.
How can I tell whether my MacBook's fans are actually broken?
Apple's diagnostics page does not list exactly what it checks, but it says Apple Diagnostics helps work out which hardware component might be at fault. On a Mac with Apple silicon you hold the power button until the startup options appear, then hold Command-D. Apple's reference codes list says PPF001, PPF003 and PPF004 mean "There may be an issue with the fan." Apple also suggests restarting the Mac, and says to contact Apple if you have issues with your Mac laptop's operating temperature.
Is it safe to make my Mac fans spin faster?
Running a fan faster adds airflow and noise, and a fan app can only ask the firmware for a speed, which the firmware may refuse. Macs Fan Control and TG Pro both say they hand the fans back to macOS when you quit, and CoolCurve keeps a restore to automatic control available even after its trial. The mistake to avoid is the opposite one: CrystalIDEA's FAQ warns that a custom fan setting that is not right can make a Mac overheat.
Can I control the fans on a MacBook Air?
Not on an Apple silicon MacBook Air. Apple's announcements describe the M1, M2, M3, M4 and M5 models as fanless, so there is no fan for any app to control. Older Intel MacBook Air models did have fans: TG Pro's FAQ names the 2018 MacBook Air as one where the hardware can switch the fan off at low temperatures.
How do I turn my Mac fans on manually?
You need a fan app that can set speeds. Macs Fan Control has a free Custom mode, TG Pro offers manual and Max options during a 14 day free trial, and CoolCurve sets fixed speeds, curves and rules on Apple silicon Macs, with a license needed after its trial. The Apple pages I read describe fans turning on automatically and do not describe a built-in speed setting. Watch the reported fan speed afterward, because the firmware can refuse a request.
Is there a free app to control Mac fan speed?
Macs Fan Control is free to download for macOS, and its vendor says it works on all Macs, Intel and Apple silicon. Its Pro version adds saved custom presets. Stats is free and open source, but its README says fan control is in legacy mode and receives no updates or fixes. CoolCurve's monitoring is free after its trial, though its fan control is not.
Will a fan app fix a MacBook that runs hot?
It can ask the fans to start sooner, which trades noise for cooling, but it cannot remove the cause of the heat. Apple's kernel_task note explains that the system reduces processor availability to manage temperature, so find out what is using the CPU first. The loud fan checklist on this site walks through that search.
- Macs Fan Control is a trademark of CrystalIDEA Software.
- TG Pro is a trademark of Tunabelly Software.
- Stats is a trademark of Serhiy Mytrovtsiy.
Taperlark is not affiliated with, endorsed by, or sponsored by any of these companies.