Mac HDMI volume greyed out: how to control external monitor volume
Volume keys dead or the slider greyed out on an HDMI or DisplayPort monitor or TV? Use the display's own volume, then a per app control for the app that is too loud.
On this page
Facts verified
If your Mac's volume keys do nothing, or the volume slider is greyed out, while sound plays through an HDMI or DisplayPort monitor or TV, the display is not offering the Mac a volume control. Turn the sound up on the display itself: its buttons, its on screen menu or the TV remote. If the real problem is one app that is too loud, lower that app inside the app or with a per app volume control, which works in software and does not need the display's cooperation.
I build Submix, which the per app steps below use as their example. Everything before those steps costs nothing, and the facts about Submix come from how it is built. If I got something wrong, email support@taperlark.com and I will fix it and say what changed.
Mac volume greyed out over HDMI: what to try first
- Check that the Mac is sending sound to the display. Open System Settings, then Sound, and look under Output for the monitor or TV by name. If it is not listed, check the cable, adapter and display connection, then look for the display again.
- Use the display's own volume. Apple's troubleshooting page says you can't use the computer's volume controls to adjust the volume while using digital output (If you can't hear sound from your Mac speakers, Apple Support, checked 2 November 2026). That sentence is written about the Mac's digital output port. An HDMI or DisplayPort link is also digital, so I read it as the same limit, but that is my reading and not an Apple statement about displays. In practice you reach for the monitor's buttons, its on screen menu, the TV remote or the receiver in the chain.
- Check the app's own slider. YouTube, Spotify, Music, VLC and most video players keep a volume level of their own. It sits in front of the display's volume, so it lowers what the display receives even when the keys are dead.
- Look for a volume entry in the monitor's menu. Monitors with built in speakers usually keep volume and mute in their on screen menu rather than on a button. A TV used as a monitor has the remote.
- Try a free app that talks to the display. MonitorControl is free, and its README says it controls an external display's brightness and volume with the DDC/CI protocol over USB-C, DisplayPort, HDMI, DVI or VGA. The same README says DisplayLink docks and dongles do not allow DDC control on Macs (MonitorControl README, checked 2 November 2026). Whether your display answers DDC is up to the display.
Mac HDMI volume control for one app
Several apps add a volume row per app. The steps here use Submix because it is the one I build.
- Download Submix and open it on an Apple silicon Mac that meets the requirement listed on the Submix page.
- Play sound in the app that is too loud, then open Submix from the menu bar. An app gets a row once Core Audio reports it as producing sound.
- Click Grant Audio Access and allow the macOS audio recording permission. It is the only permission volume control needs, and it installs no driver.
- Drag the app's slider down. The percentage beside it shows the level, and no other app moves.
- To silence the app instead, click the speaker icon on its row.
This works when the display has no volume control because of where the change is made. Submix takes the app's audio, multiplies every sample by the slider's value, and plays the result to the output device. The display only receives a quieter signal, and it never has to expose a volume property for that to happen.
Volume and mute run during the full feature trial and need a paid license afterward. See the current plans before you rely on it.
Control external monitor volume on a Mac: what a per app control cannot do
- It controls each app, not the display. The display keeps its own volume, and that is still the one you set with its buttons or remote. If everything is too quiet with the display at maximum, lowering apps will not help. A quiet app can be raised past 100 percent, and the audio booster guide covers where that stops being clean.
- The slider at the top of Submix is the same slider that is greyed out. It reads the volume of the current output device and is disabled when the device reports no volume property. Submix cannot revive it, and it leaves the volume keys alone.
- Surround becomes stereo. The tap on an app is a stereo mixdown, so a surround soundtrack from a controlled app reaches the display as two channels. If you send surround to a receiver, check this with your own app before you rely on it.
- Some audio cannot be tapped. Protected media paths are not visible to any tap, so an app playing that kind of stream may show no row at all.
Mac DisplayPort volume control: why the slider is greyed out
My reasoning, not an Apple statement: the volume slider and keys act on a volume control that the output device reports to macOS. A built in speaker or a headphone jack reports one. A display that decides its own volume in its own firmware may report nothing, and then the Mac has no control to move, so the slider is greyed out and the keys do nothing. Submix does the same check for its top slider, which is how I know the condition exists: it asks the output device for a volume property and disables the slider when there is none.
The same reasoning explains why the display's own controls work. Its volume is applied after the signal arrives, on the display's side of the cable.
Changelog: first published November 2026.
Frequently asked questions
Why is the volume greyed out on my Mac when it is connected to a monitor over HDMI?
The display is probably not giving macOS a volume control to move. Apple says you can't use the computer's volume controls while using digital output, in a page written about the Mac's digital output port. An HDMI or DisplayPort link is also digital, so I read it as the same limit. Use the monitor's buttons or the TV remote.
How do I control the volume of an external monitor from my Mac?
If the display exposes no volume control, there is no built in way, and the display's own buttons, on screen menu or remote set the level. MonitorControl is a free app whose README describes DDC volume control for external displays. What you can control from the Mac is each app: the app's own slider, or a per app volume app that lowers one app's audio in software.
Why do my Mac volume keys do nothing when I use a TV as a monitor?
The keys act on a volume control that the output device reports to macOS. A TV that sets its own volume may report none, so there is nothing for the keys to move. That is reasoning, not an Apple statement. The TV remote still sets the level.
Does a per app volume control work on an HDMI monitor that has no volume control?
Yes. Submix multiplies each sample of an app's audio by the slider's value in software and plays the result to the display. The display never has to expose a volume property for that. It lowers one app at a time, not the display itself.
Will Submix make my Mac volume keys work over HDMI or DisplayPort?
No. Submix leaves the volume keys alone, and the slider at the top of its panel is disabled when the output device reports no volume property. It controls each app's level instead. Optional shortcuts that you set in Submix settings can raise, lower or mute the app it picks from the last sampled meter levels.
Does Submix keep surround sound from an app when I use HDMI?
No. The tap on an app is a stereo mixdown, so a surround soundtrack from a controlled app reaches the display as two channels. If you depend on surround through a receiver, check it with your own app first.
Do I have to pay to control app volume over HDMI with Submix?
Volume and mute run during the full feature trial and need a paid license afterward. The display's own controls and each app's own slider cost nothing, so try those first.