Submix notes

Mac audio booster: how to make your Mac or one app louder than max volume

When your Mac or one app is too quiet at full volume, check the app and the output first, then boost the one app. What a boost can and cannot do, and the boosters worth a look.

On this page

Facts verified

If your Mac or one app is too quiet at full volume, check the app's own volume and the output device first, then boost just that app. A boost multiplies the signal past what the sliders reach, which works on a quiet recording and distorts one that is already loud. Work out which of two problems you have before installing anything: either the whole Mac is quiet, which is usually a setting or the hardware, or one app is, which is where an audio booster helps.

I build Submix, which is one of the boosters in this post. The checks that cost nothing come first, other tools are named with a link to each vendor's own page, and the facts about Submix come from how it is built. If I got something wrong about your app, email support@taperlark.com and I will fix it and say what changed.

Check these before you install a Mac audio booster

  1. The app's own volume. YouTube, Spotify, VLC and most video players keep a volume level of their own, separate from the system's. Meeting apps keep an output volume in their settings. An app turned down to half stays quiet however high the system slider is.
  2. The output device. In System Settings, then Sound, pick the output and drag its slider to the top. Many headphones, Bluetooth speakers and monitors also have their own volume control that works independently of the Mac's, so check the device itself. If the output is a monitor or TV whose volume is greyed out on the Mac, that has its own page.
  3. A mixer you already run. If you use a per app mixer, an app's row set below 100 percent holds it quiet whatever the system slider says. Put it back at 100 before you conclude the app is quiet.
  4. The file. If one video is quiet and everything else sounds fine, the recording is the problem, and a boost is the right tool for it.

If those checks leave one app quiet at 100 percent everywhere, you want a boost. If the problem is the opposite, one app too loud next to the rest, lowering it is a different job.

How to make one app louder than max volume with Submix

  1. Download Submix and open it on an Apple silicon Mac that meets the requirement listed on the Submix page.
  2. Play sound in the quiet app, then open Submix from the menu bar. The app gets a row once it produces sound.
  3. Click Grant Audio Access and allow the macOS audio recording permission.
  4. Drag the row's slider past the middle mark, or scroll over it; hold Shift while scrolling for smaller steps. The percentage beside the slider turns orange once you are above 100.
  5. Raise it in small steps and stop when the sound starts to crackle.

Submix can raise one app above its normal level. Increase it gradually and back off if you hear distortion. The slider stops at 400 percent, the most Submix will apply. It is a plain multiplication with no limiter, so a source that already peaks near full scale will distort well before that.

A few more limits are worth knowing. The boost is per app: the slider at the top of the list moves the output device's own volume, so it cannot go past that device's maximum. An app gets a row once it produces sound and keeps it, greyed out, after playback stops; system alert chimes are left out of the list. And boost belongs to the paid feature set. It runs during the full feature trial and needs a license afterward; if access ends while an app sits above 100 percent, Submix clamps that app back to 100 percent.

Why your Mac is quiet at maximum volume

The system slider at maximum is the loudest your output device will play a full scale signal. A recording mastered quietly does not use all of that range, so the slider has nowhere left to go. That is the case a boost can fix. Multiplying a quiet signal by a number greater than one lands the result in range that was always available.

The other case is a source that already peaks near full scale. Multiply that and the result goes past what the output can represent, so it distorts. No boosting tool can add loudness the playback chain does not have, which is why a loud file that sounds quiet on tiny laptop speakers needs better speakers, not a bigger multiplier.

Other Mac audio boosters, from the vendors' own pages

A boost that covers the whole Mac is a different tool from a per app one, and several exist. These facts come from each vendor's page, read on the date at the top of this post.

ToolWhat it boostsWhat the vendor saysCost
Boom 3D, Global DelightThe whole Mac"a system-wide volume booster that safely increases the volume beyond its regular limits", Mac version only; macOS 11 or later15 day free trial; see the vendor page
eqMac, BitgappThe page does not say whether per app or system wide"Boost volume beyond 100%" is listed under Volume & Balance, tagged Freefree; the per app App Mixer is in the Pro tier
FineTune, Ronit SinghPer app"Per-app volume boost" with 2x, 3x and 4x gain presets; its source applies a soft knee limiter to the outputfree; macOS 15.0 or later
SoundDial, Eduard BruchPer app"Per-app volume from 0% to 200%" and boosting apps that are too quiet; macOS 14.2 or later$14.99
Background Music, Kyle NeideckPer appPer app volume sliders including boosting quiet apps; the README lists clipping above 50 percent as a known issuefree

SoundSource is the other name you will see. Rogue Amoeba's product page says you can make one app "louder or softer than others" and names built in effects called Volume Overdrive and Magic Boost. The page does not say how far either one goes, so read its manual before you buy it for a boost.

The difference worth weighing is the limiter. FineTune's source includes one, which keeps boosted peaks under full scale at the cost of squeezing them. Submix leaves the signal as a straight multiplication. A limiter is gentler than clipping on a loud source, and I would pick FineTune if your Mac runs macOS 15 or later and the sources you boost are already hot. For more on how these apps compare as mixers, see the Mac volume mixer comparison.

What a boost cannot fix

Boosting amplifies everything in the signal, including the hiss in a poor recording. Small laptop speakers can run out of range before the boost does, and loud playback over headphones is hard on your ears, so raise it in small steps. A booster also cannot touch audio it cannot reach. Submix only sees apps that Core Audio reports as producing sound, and it leaves the system's own alert sounds alone.

Changelog: first published November 2026.

Frequently asked questions

My MacBook speakers are too quiet even at max volume, is there an app to make them louder?

Yes, but check the playing app's own volume and the output device's own control first. If one app is still quiet, a booster multiplies its audio past 100 percent, and Boom 3D describes itself as a system wide volume booster for the Mac. A boost cannot add loudness the source lacks: a signal already near full scale will distort.

How do I make my Mac louder than max volume?

Check the app's own volume and the output device first. If one app is still quiet with everything at maximum, a per app boost multiplies that app's audio past 100 percent. Submix lets a row go up to 400 percent; whole Mac boosters such as Boom 3D raise everything at once.

One video on my Mac is really quiet with the volume all the way up, can I boost just that app?

Yes. A per app mixer gives each app that is making sound its own volume row, and a boost past 100 percent applies to that row only. In Submix, drag the slider past the middle mark. The system volume and every other app stay where they were.

How loud can Submix boost an app?

Up to 400 percent, which is four times the amplitude or about 12 decibels more. The slider stops there. The boost is a plain multiplication with no limiter, so a source that already peaks near full scale will distort well before the ceiling.

Will boosting the volume on my Mac make the sound distorted or crackly?

It can. Boosting multiplies the signal, and a signal that already peaks near full scale goes past what the output can play, which sounds like crackle. A quiet source boosts cleanly. Raise the boost in small steps and back off when you hear distortion.

Do I have to pay for the volume boost in Submix once the trial ends?

Yes. Boost runs during the full feature trial and needs a paid license afterward, like volume control, mute, meters and output routing. If boost access ends, a row already above 100 percent is clamped back to 100 percent.

Why is my Mac so quiet at full volume when I have already checked the system slider?

Usually the source. A recording mastered quietly leaves unused range that the system slider cannot reach. Other causes are the app's own volume set low, a mixer row below 100 percent, or the output device's own volume control. Check those before boosting.

  • Boom 3D is a trademark of Global Delight Technologies Pvt. Ltd..
  • eqMac is a trademark of Bitgapp Ltd..
  • FineTune is a trademark of Ronit Singh.
  • SoundDial is a trademark of Eduard Bruch.
  • Background Music is a trademark of Kyle Neideck.
  • SoundSource 6 is a trademark of Rogue Amoeba Software, LLC.

Taperlark is not affiliated with, endorsed by, or sponsored by any of these companies.

Back to Submix