Submix notes

Output audio to two Bluetooth devices or speakers from one Mac app

Play a Mac app through two Bluetooth speakers, or headphones and speakers, at once. Audio MIDI Setup does the whole Mac; Submix does one app, with sync limits stated.

On this page

Facts verified

To play one Mac app through two speakers or headphones at once, select both devices in that app's output menu in Submix. To send all your Mac's sound to both devices instead, create a Multi-Output Device in Audio MIDI Setup. Two Bluetooth devices can play audibly apart, because Submix does not compensate for each device's own delay, and Bluetooth devices add different amounts.

I build Submix, which the one app steps below use as their example. The built in method comes first and costs nothing, and the facts about Submix come from how it is built. If I got something wrong, email support@taperlark.com and I will fix it and say what changed.

Output audio to two Bluetooth devices on a Mac with Audio MIDI Setup

Connect both devices first, so each one shows up as an output in System Settings, then Sound. Then, following Apple's page on playing audio through multiple devices at once (Apple Support, checked 2 November 2026):

  1. Open Audio MIDI Setup. It lives in the Utilities folder inside Applications.
  2. Click the Add button at the bottom of the sidebar, then choose Create Multi-Output Device.
  3. Tick the Use box of each device you want in it.
  4. Pick a Primary Device from the pop up menu. Apple describes it as the device whose audio also plays through the others in the stack.
  5. In System Settings, then Sound, choose the new Multi-Output Device as the output.

Every app now plays to both devices, because you widened the default output. Apple's page does not say anything about volume for these devices. Open Sound settings with the Multi-Output Device selected and see whether the slider moves. If it is greyed out, set each device's level on the device itself.

How do I play one Mac app through headphones and speakers?

A Multi-Output Device is all or nothing. If only your music should reach both outputs and your meeting should stay on one, the output has to be set per app, and macOS has no setting for that. The steps below use Submix.

  1. Download Submix and open it on an Apple silicon Mac that meets the requirement listed on the Submix page.
  2. Connect both output devices, play sound in the app, then open Submix from the menu bar. The app gets a row once it produces sound.
  3. Click Grant Audio Access and allow the macOS audio recording permission.
  4. Hover over the app's row and open its output menu. While a row follows the system output, the button stays hidden until you hover.
  5. Tick each device you want. The menu is a multi select: it lists the output devices Core Audio reports, and a second tick adds a device rather than replacing the first.
  6. Check that sound comes from every ticked device. To go back, untick everything or choose Follow System Output.

Per app routing runs during the full feature trial and needs a paid license afterward. See the current plans. To send an app to a different output instead of an extra one, see the one app to headphones guide.

How one app reaches two outputs at once

Submix taps that one app and builds a private aggregate device that carries the tap to every device you ticked. All of them get the same stream. The first device you tick is the clock source, and the others get drift correction, which keeps their clocks from slowly wandering apart. If a ticked device is unplugged, the route keeps playing to the devices that remain attached. Nothing else on the Mac is touched, because only that app's audio goes through the tap.

Can you output audio to two Bluetooth devices at once, and where it goes out of sync

Submix does not compensate for latency. It sets drift correction on the extra devices, but drift correction handles clocks running at slightly different speeds, not a fixed delay between one device and another. Bluetooth links add delay of their own, and different devices add different amounts, so two Bluetooth speakers of different models, or Bluetooth next to a wired output, can play audibly apart. Two identical speakers are the safest match, by reasoning rather than test.

A few more limits:

  • One level per app. The app's volume slider applies before the audio fans out, so both devices get the same level. Set each device's own volume on the device.
  • Both devices must be connected. Submix lists what Core Audio shows as an output, and whether your Mac and your two Bluetooth devices can stay connected at once is up to the hardware.
  • Protected media. Streams on a protected path are not visible to any tap, so such an app may show no row.

Changelog: first published November 2026.

Frequently asked questions

Can you output audio to two Bluetooth devices at once on a Mac?

Yes. Connect both so they show as outputs, then create a Multi-Output Device in Audio MIDI Setup and tick each one, which sends the whole Mac to both. For one app only, Submix lets you tick several devices in that app's output menu. They may not stay in sync.

How do I play sound through headphones and speakers at the same time on a Mac?

Create a Multi-Output Device in Audio MIDI Setup, tick the speakers and the headphones, and choose it as the output in Sound settings. That covers every app. To double only one app, tick both devices in its output menu in Submix.

Why can't I change the volume of my Multi-Output Device on a Mac?

Apple's page on multiple devices in Audio MIDI Setup does not mention volume. A Multi-Output Device is a virtual device, and the Sound slider may be greyed out for it. If so, set the level on each device. Check the slider with the device selected.

Will two Bluetooth speakers play in sync on my Mac?

Not reliably. Submix puts drift correction on the extra devices, which handles clocks running at slightly different speeds, and it does not compensate for each device's own delay. Bluetooth adds delay and devices add different amounts.

Can I send one app to two outputs while other apps stay on one?

Yes, with Submix. Hover over the app's row, open its output menu and tick both devices. Only that app's audio is split to them, and every other app keeps following the system output. Per app routing needs the trial or a license.

Can I set a different volume for each output when one app plays on two?

No. The app's volume slider applies before the audio is sent out, so both devices get the same level. Set each device's own volume on the device, such as a speaker's knob or the headphones' controls.

Which device does Submix use as the clock when one app plays on two outputs?

The first device you tick is the clock source, and the other devices get drift correction. If a ticked device is unplugged, the route keeps playing to the devices that remain attached.

Back to Submix